Lubricant LubriMay 13 to lubricate spindles of SCHATTELLO/ALBATROS.

Cardboard sleeve for ALBATROS including 2x 353982 and 1x 353980, all fixed with 4 screws (TX 30) each, inner ø 45 cm, length 560 cm, thickness 0.7 cm.

Crank, width across flat 9 mm, with MAY-logo on handle, for DACAPO/RIALTO/SCHATTELLO/ALBATROS.

Full frame pedestal ALBATROS with levelling screws, 112 x 112 cm, galvanised, without slabs, incl. theft pin.

anchor foot ALBATROS with placement hinge, upper part removable, 2-part, galvanised, base plate 24 x 27.3 cm, incl. theft pin, incl. top plate for winter protection, incl. installation instructions, also online at https://may.ag/AZ120_en.pdf

standard parts "Paket 02"

Cover plug on for spoke ending, with drill hole for canopy hook, colour in black, (till approx. 2011), fits for aluminium teleskopic shaft, fits for spoke profile 50 x 25 mm, fits for ALBATROS.

Cover plug on for spoke ending, with drill hole for canopy hook, colour in grey, (till approx. 2011), fits for aluminium teleskopic shaft, fits for spoke profile 50 x 25 mm, fits for ALBATROS.

Cover plug on for spoke ending, with drill hole for canopy hook, colour in white, (till approx. 2011), for aluminium teleskopic shaft, for spoke profile 50 x 25 mm, for ALBATROS.

Repair plate for top cap fixation, thread M10 is made centrically, fixation with existing hexagon socked head screw; made of aluminium, fits for ALBATROS.

Flat-head screw with Z cross recess, stainless steel A2, M6 x 50 mm.

Cylinder bolt Ø 8 x 54 mm, on lower distribution flange, stainless steel A2, fits for ALBATROS.

Protective cap, for bolt with head on support strut, for frame in RAL 8019 and 7016, plastic, colour black, (since approx. 2010), 36 x 47 mm, length 48 mm, for ALBATROS.

Protective cap, for bolt with head on support strut, fits for frame in RAL 9006, plastic, colour grey, (since approx. 2010), 36 x 47 mm, length 48 mm, fits for ALBATROS.

Protective cap, for bolt with head on support strut, for frame in RAL 9010, plastic, colour white, (since approx. 2010), 36 x 47 mm, length 48 mm, for ALBATROS.

End cap on telescopic shaft for end of spoke, long version, fixation with screw, (since 2017 / 2018) plastic in black, 40 x 20 mm, length 39 mm, for ALBATROS.

End cap on telescopic shaft for end of spoke, long version, fixation with screw, (since 2017 / 2018) plastic in grey, 40 x 20 mm, length 39 mm, for ALBATROS.

End cap on telescopic shaft for end of spoke, long version, fixation with screw, (since 2017 / 201), plastic in white, 40 x 20 mm, length 39 mm, for ALBATROS.

Countersunk tapping screw, Torx 15, steel ganvanized, outer Ø 3.9 mm, length 22 mm, galvanised.

Bolt with head ø 8 mm, on eye bolt on protective cap, stainless steel A2, outer Ø 10 mm, length 30 mm, for ALBATROS.

Bolt with head ø 8 mm, for spoke on upper distribution flange, stainless steel A2, outer Ø 10 mm, length 34 mm, fits for ALBATROS.

Spacer for eye bolt, galvanised, outer ø 20 mm, length 18 mm, fits for ALBATROS.

Eye bolt, galvanised, M10 x 52 mm.