Cleaning concentrate CleanoMay 13. Cleans membrane and frame of parasols. 1 Litre. Biodegradable and non-toxic.

Lubricant LubriMay 13 to lubricate spindles of SCHATTELLO/ALBATROS.

Cardboard sleeve for SCHATTELLO with 12 segments, including 2 end caps, both fixed with screws (TX 30), inner Ø 35 cm, length 444 cm, thickness 0.5 cm.

Cardboard sleeve for SCHATTELLO with 8 segments, including 2 end caps, 1x fixed with clamps, 1x fixed with tape inner Ø 33 cm, length 444 cm, thickness 0,5 cm.

MAY-strap, for SCHATTELLO with infrared heaters, to secure the closed parasol, textile yellow / black, length 2 m.

MAY-strap for SCHATTELLO without infrared heaters, to secure the closed parasol, textile yellow / black, length 1.6 m.

Crank, width across flat 9 mm, with MAY-logo on handle, for DACAPO/RIALTO/SCHATTELLO/ALBATROS.

Full frame pedestal SCHATTELLO with 4 feet for forklift, 94 x 94 cm, British Version

Full frame pedestal SCHATTELLO with levelling screws, 94 x 94 cm, British Version, for concrete slabs 45 x 45 x 5 cm, without concrete slabs, galvanised.

Anti-theft pin, pin and padlock, in stainless steel AISI 304, for SCHATTELLO.

Dowel-anchored plate SCHATTELLO with upper part SZ150, with placement hinge, mounted at ground level, galvanised, base plate: 260 x 275 x 12mm, incl. installation instructions, also online at https://may.ag/SZ131_en.pdf

Anchor tube SCHATTELLO, with placement hinge, screw-off upper part, 2-part, galvanised, incl. top plate for winter protection, incl. installation instructions, also online at https://may.ag/SZ150_en.pdf

Anchor tube SCHATTELLO, upper part removable, 2-part, galvanised, incl. top plate for winter protection, incl. installation instructions, also online at http://may.ag/SZ118_en.pdf

standard parts "Paket 13"

Hexagonal fitting, for battery-powered drill, for SCHATTELLO/ALBATROS, width across flat 9 mm.

Bolt with head ø 8 mm, on eye bolt on protective cap, stainless steel A2, 1 piece per spoke neccessary, outer ø 10 mm, length 25.6 mm, for SCHATTELLO.

PVC washer for bolts, black, inner Ø 8.4 mm, outer Ø 17.2 mm, 2 pieces per bolt necessary, for SCHATTELLO/ALBATROS.

PVC washer for bolts, white, inner Ø 8.4 mm, outer Ø 17.2 mm, 2 pieces per bolt necessary, for SCHATTELLO/ALBATROS.

Heat shrink tubing, rubber, length 20 mm, for SCHATTELLO/ALBATROS.

Countersunk head screw with hexagon socket, stainless steel A2, M6 x 14 mm.

Repair disc for top cap fixation, thread M10 is made centrically, fixation with included double sided-tape made of aluminium, for FILIUS and SCHATTELLO.

Gear ø 76 mm, 1x output gear, fits for SCHATTELLO.

Spindle, (since approx. 1995) aluminium grey, outer ø 28 mm, length 1,340 mm, for SCHATTELLO.